Automatic Conveyor Belt Four-Column Hydraulic Press Die Cutting
Machine
Technical Spec:
| Maximum Cutting Force | 40T | 60T | 250T |
| Cutting Area (mm) | 1250*800 | 1250*1200/1600*1200 | 1800*1200/Customizable |
| Tension Distance (mm) | 25-135 | 25-135 | 25-175/Customizable |
| Motor Power (kw) | 4 | 5.5 | 22kw |
| Estimated G.W (kg) | 5000 | 7500 | 15900 |
Product Description:
1. This type of die cutting machine with conveyor belt is used for
continuous and large-batch cutting of nonmetal materials in rolls,
such as carpet and car interior materials, ball panel materials,
leather, rubber, film, fabric and other materials.
2. The materials conveying part adopts PLC control. The materials
are driven by servo motor and feed in from one side of the machine
and finished products come out from the other side. The feeding is
precise and automatic. The feeding length can be adjusted
conveniently through touch screen.
3. The machine can be installed with four-column guiding,
double-crank balancing, four-column blocking fine-adjustment
mechanism and specially designed hydraulic control system,
providing high speed and precise cutting operation. Central oil
supply automatic lubricating device reduces the abrasion of all
movable connecting parts to the minimum.
4. The die cutter or cutting mould can be fastened by pneumatic
clamp device so as to make its replacement convenient and prompt.
5. Machines with special specifications can be available on
request.
Efficiency Hydraulic Traveling-head Cutting Machine XCLL-2/25
Application:
This machine is suitable for cutting materials of single or
multi-layer leather, rubber, plastic, plastic, textile, chemical
fiber etc.
Advantage:
1. The machine is easy to operate, simple, low failure rate, strong
cutting force and quick cutting speed.
2. The machine is a double oil cylinder and precise four-column
automatic balancing connecting rod structure to ensure the same
depth of each cutting position.
3. When the cutting plate is under pressure, the cutting blade is
automatically cut, so that the cutting material has no size error
at the top and bottom.
4. It is operated by hands with high safety.
Parameter:
Maximum impact force:250KN 300KN
The cutting speed:0.12m/s
Stroke range:0-120mm
The distance between the upper and lower plates:30-150mm
Upper pressure plate size:500x500mm
Lower work table size:1600x500mm
The motor power:2.2kw
Overall dimensions:2200x700x2050mm
The weight:1680kg
Note:The company can customize the special specifications such as
cutting zone, feeding mode (single, bilateral automatic feeding)
according to customer's requirements.
